Integrated 3 degrees adjustable brightness energy-saving LED lamp for lighting of working field.
Model with energy-saving AC Servo motor, control box, programming control panel and power switch integrated into machine head (mechatronic "all-in-one" set). Thanks to integration of all elements the machine works quietly and without adverse vibrations.
AC Servo motor saves up to 70% energy comparing to a conventional electronic motor or clutch motor.
Bottom feed, max sewing speed 5.000 s.p.m., max. stitch length 5 mm. Modern cooling system of motor and control module.
Mechatronic, automatic 1-needle lockstitch machine for light and medium materials.
Now equipped with innovative closed lubrication system divided into two sections - first one lubricate hook and have special oil detector that makes sound signal when the oil runs low. Other section lubricate the moving parts, except for dry needle bar protected by PTFE.
Machine is serial equipped with automatic functions:
- needle positioning,
- thread trimmer - standard 5 mm,
- electromagnetic foot lifting
- pedal and knee lifter (up to 9 mm, and with use of knee lifter to 13 mm),
- reverse feeding with programmed size of the initial and final bartack,
- possibility of programming sewing sections,
- controller of initial stitch,
Built-in USB port - to be used for battery charging (smartphones and tablets).
Machine equipped with touch control panel. 30 buttonhole patterns in standard (including 4 bar tacking programs). Possibility of self designing of buttonholes and storing them in panel (up to 99 programs).
Serial clamps size 29 x 5 mm and 40 x 6 mm. Buttonhole cut-out length 6.4 - 31.8 mm, max. foot presser lift 17 mm, max. sewing speed 3.600 s.p.m.
Multifunctional, electronic controlled and programmed buttonhole machine. Equipped with built-in fast and precise stepping motors working in x and y axis and Direct Drive system with servo motor mounted in machine head.
Automatic functions: foot lifter, thread trimming, fabric feeding, sewing speed regulation, cloth cutting mechanism (multi-cut system - buttonhole of any length, without changing the knife).
Machine equipped with the safety device which prevents fabric from cutting in case of thread breaking. Thanks to applying a modern technology, lubrication is limited to the minimum (what prevents the formation of spots on the sewing products). LED lamp for lighting of working field in standard. For sewing light and medium materials.
Eyelet buttonhole length 8 - 42 mm, straight buttonhole length 5 - 42 mm. max. cut-out length 42 mm. Stitch pitch 0.5 - 2.0 mm. Taper bar length 0 - 20 mm.
Sewing speed up to 2.500 s.p.m. Compressed air necessary 5 bar.
Automatic industrial eyelet buttonhole machine for sewing eyelet buttonhole or straight, with cross tack, half-round tack, with taper bar or without. 2-thread chainstitch. Cutting before or after sewing. Thread trimmer for needle thread, looper thread and gimp are cut manually. Material feeding by built-in step motors.
Machine with large working space for convenient operation. Equipped with programming control panel and integrated LED lamp for lighting of working field. Buttonholes programming on the touch control panel and storing them in memory.
Serial equipped with clamp 30 mm length and cutting block 22 mm.